Author Archives: flaagan

Got a whole lot done today (and the past few nights). The dash has been removed, and the stubborn heater control button was finally disconnected from the dash, along with the horn button. On a whim, I wired the horn … Continue reading →

Started pulling more stuff out. Got the windshield wiper assembly off the top of the firewall, and after looking it over, I’ll likely order a similar setup instead of trying something different. I moved on to pulling back the main … Continue reading →

After a rather frustrating day at work with many setbacks on projects, I felt like I had to get something done today… so I went after the Morgan. I finished off removing the heater system which I’d started on a … Continue reading →

Dug into the Morgan some more this afternoon, pulled off the glove box, the framework for the convertible roof, and started removing the firewall. The latter’s held down by a number of other parts that’ll have to be removed first. The … Continue reading →

After much fighting with a number of bolts that just refused to come loose (until I persuaded them with a drill), I’ve managed to remove the “toolbox” that sits up on the dash under the hood (bonnet). This will go … Continue reading →

Pulled together the stuff that needs bodywork and needs to get cleaned up, sending it off to Spray Technology to get media blasted and a rust inhibitting primer.

Minor update, got the driver side fender support off tonight. This side proved to be a lot easier, about half the bolts running along the bottom didn’t have nuts on them and the rest came apart relatively easily. At some … Continue reading →

Took to wrenching off one of the the two fender supports this evening. I probably used half a can of WD-40 to clear off all the gunk on the nuts and bolts. For the most part getting everying off wasn’t … Continue reading →